Fishers Hut QuickLinks
Assembly of the Props and Bits for the Fishers hut is overall really straight forward. I did assemble while painting in order to make the painting process easier.
1) To begin the assembly process I added the pillars to the floor. The poles & lantern go into the far corner while the pillars by the side counter go A, B, C moving from the Front of the Hut to the back.
Special Advice: There are triangles hidden on the floors and on the poles to help with alignment. Since some of the poles lean at an angle this ensured that they were level on the top. I put the pole Letter side (printed into the poles) downward.
2) I then glued the ropes between the lantern pole and the two from Floor B. The rope from floor B normally would print with the piece but that failed so I printed an extra piece of role which turned out great.
3) Following that I added the fish sign to the roof and window shutters to the front window.
6) Lastly I added the ladder & fishing pole to the build to finish off the glued attached pieces. All other props are loose to be used anyway you want on the building.
To see the full painting process feel free to check out the post for the painting progress!