Frostgrave Part 5: Frostgrave Game Day


Now for the seriously overdue conclusion to my Frostgrave series. I truly do not know where to begin, I’ve spent the last few weeks ruminating on how to articulate the experience and journey. In short it has caused some serious writers block.

Its been an absolutely wild ride. I started this project at the end of July with the quest towards an epic day of gaming and playing Frostgrave with my wonderful husband. Over the course of the past two months I’ve been tirelessly planning, printing, and painting as much as I could to truly bring a terrain dense and immersive game day. This was to accomplish two primary goals.

  • Try to overcome some of the downfalls from truly enjoying the game in our first few games from February which I discuss in Frostgrave Beginnings.

Due to the lack of terrain the game was significantly overpowered towards ranged attacks which reduced the fun of the game for me and really felt tremendously unbalanced as a game. Conclusion Learned: Yes increased terrain does significantly reduce the power of ranged combatants and really make things fun for all warband members.

  • I really needed a day to bond with my best friend which wasn’t just about our kids.

If those of you do not know we added another member to our crazy family four months ago and of course newborns can take a serious chunk of time out of your schedule. On top of that, due to Covid it has been incredibly difficult to have a date night or get out of the house. So the result was to find a baby sitter to watch the kids and be able to have a day of action filled gaming. As we do not currently have an active Tabletop group I was sorely missing being able to play and is a big piece of things we enjoy doing together. This was something that I could plan in advance and really get hyped about with him.


Overall I think these goals were accomplished. Now before I get into it more lets check out a few of the action shots. 

Game One: Scenario Mausoleum

Scenario: The Mausoleum

Our first game consisted of playing one of the very first scenarios you read in the core rule book for Frostgrave the Mausoleum. This scenario requires two things; a mausoleum and skeletons.

The mausoleum is placed in the center of the board and has 4 sides with doors on each side. There are four treasures on each of the corners of the mausoleum and two placed by players within nine inches of the mausoleum. Of course Mr. Crazy had to place a treasure on the very top of the mausoleum to climb and get to while I placed my extra on a stack of barrels which also had to be climbed (or a well aimed Telekinesis spell). The added features about the scenario is the fact that a skeleton will come out of a random door at the end of a turn along with the monster rolls when treasure was picked up and we added the optional monster encounter rules. This of course lead to a growing danger of more and more monsters as you started to dwindle in warband members.

Overall it was a great and very close game. Mr. Crazy shut down my Sigilist really soundless with Curse and Plague of Insects making it almost impossible to cast any spell. My wardog Yippers was the real MVP and killed almost half of his warband in protecting my people trying to get the treasure. In the end I captured 3 treasures while he only captured 2 with one left on the board swarmed by monsters and unable to be retrieved.

Scenario: The Keep

For game number two we played the scenario the Keep. This story sets up with four magical discs which hold treasure but could magically teleport to a random one of the four. When a player tries to pick up the treasure you would teleport. What made this game interesting is the fact that you could potentially teleport into the enemy own disc and suddenly it becomes incredibly difficult to run away.

This game I really loved the set up of the discs and usage of the ruins from Hagglethorn Hollow. However I did find some areas too clustered for good movement. The more open area allowed for significantly more movement and sometimes advantage for team Necromancer and made my Sigilist warband only transverse less than 1/4th of the board. I definitely feel as if I swung to far in density. But you never know until you try right?


Conclusion of a Major Project

While I of course didn’t complete every goal I set out to accomplish in this endeavor, I’m incredibly thrilled in what I have accomplished. Ironically during the course of this project I have been constantly reminded by friends and family that I am incapable of doing anything halfway. So to not even start painting pieces of terrain or even prime in some cases definitely bothered me. However there was an indescribable feeling of satisfaction and excitement sitting down at that table after all that time. Knowing you put in so much time and effort and seeing the fruit of your labor and enjoying it for a game is why I started the hobby in the first place.

Overall project and experience are definitely going to end up being a hobby highlight for the year. I had so much fun, my cheeks hurt from smiling for hours afterwards. It felt incredible to have things to plan for and talk about moving.

The Highs


Printing
Almost every single piece of terrain 3D printed on this map was created in the 2021 year (exception of the Mausoleum in the center). Approximately 80% of the terrain was made in a two month span August – September 2021. Some ruined buildings and pillars were made earlier in the year.

100% of this Battle Mat and our Warbands are 3D Printed! Note some random encounter monsters are manufactured miniatures, mostly reaper.

Battle Mat
Usage of Scatter Terrain was 100% a game changer for me and fantastic. I loved having treasure stacked on top of a bunch of barrels requiring you to climb up to them (Or use telekinesis) along with having figures standing on crates to get a better vantage point for shooting. There is so much versatility in spells and cover and highly recommend putting in the time for a collection of scatter terrain.

Painting
Lastly the largest high is that every single member of our warbands had paint on it. They were not 100% finished to my typical standards but having painted minis on the table was an incredible feeling. In the end I painted a record of 19 models in the two month span and of course took the majority of my painting time.

All painted models for August and September

The feeling of community. During this project I really bonded and shared what I do and what I enjoy with not only my husband but also friends. They cheered me on and even helped in the painting of some terrain and models. The tabletop crafting and miniature painting hobby can sometimes be incredibly lonely and it was an absolute treat to be able to have others apart of my journey. If you have been following along with me on this project I thank you for cheering me on.


The Lows

I of course was disappointed that I did not have the time to paint everything. Yes I know I was being overly ambitious but a girl can dream. At least you can get a glimpse of the colored filament I was trying to use up, I almost always paint what I print (or aspire to) so colored filament doesn’t matter to me.

It also strangely bothered me that I did not have a 3 foot by 3 foot battle mat and I used green construction paper to flush it out. I also do not own a frost or snow themed battle mat (yet) as the 2 foot x 3 foot mat I bought is coming later in the year from a Kickstarter by EC3D Dungeonmats who made the current dungeon mat I am using. I love the double sided mats so much I decided to back their latest kickstarter to get a frost one.

I didn’t fit in all the aspects of map layout design I really wanted to accomplish. I worked hard on a bridge and river to attempt to incorporate water into my board but in the end it did not make sense space wise for the games. I did spend a good deal of time on that and am definitely disappointed it didn’t make it in. This resulted in all the research I did in my map design to be kinda thrown out the window but did turn out to be a fun table in the end regardless.

Hobby burn out. Working so hard on so many things seriously have taken a toll on my hobby printing and painting since game day. It was incredibly difficult to keep up with all the various things I was producing, their hobby status, what I was missing and keeping it all organized. I normally am great with creating pages and print logs for every single thing but in the mad Hussle to get stuff on the table I have yet to compile the data for better searching of what is out there in the community. This is definitely something I plan to fix in the future.

Since the conclusion of this project I haven’t dove seriously into anything yet for personal hobby time but have officially started working professionally in the 3D printing space. Don’t worry i’ll share more in the time to come.


What’s Next in Frostgrave?

The Frostgrave series on the site has truly been something special for me and obviously based on comments and feedback a project others can relate with. So I am opening this up to a group conversation and am curious what you think you would like to see and read.

  • Would you like to follow on our adventures with Battle Reports of our games?
  • Would a useful section of the site specific for Frostgrave be useful on images and tools of how some of the rules work? (A birth of a game section for the site)
  • A quest to paint every miniature in the bestiary?
  • Reviews of supplements and expansions? What is in them, what they provide
  • Simplified “what you need to play?” so other new players can join in the fun.

Or perhaps should I start and prep for a different game in the Joseph Mccullough collection such as Ghost of the Archipelago, Ranges of Shadowdeep, Stargrave.

Let me know!


As always happy hobby and have a wonderful day.

Cheers,
Carrie, Crazmadsci the Crazy mad scientist


Frostgrave Series


Past Hobby Blog Posts

Frostgrave Part 4: Status Update


19 Days Til Frostgrave!

We are over half way through the timeline of my Frostgrave project. So far it has been a wild ride and to summarize my feelings over the last two weeks, overwhelmed. I’ve spent a little bit over a month on my most ambitious terrain and miniature project to date. Its going to be extremely close to succeeding my goals and reaching the deadline of creating a 3×3 foot epic and immersive war gaming board to play with my husband. It has been hard to schedule games lately and this will be a real treat. If you want to follow along my journey from the beginning. Start at the Frostgrave Beginnings post of this series.

Since we are over the halfway mark lets reflect on my current project status. It has been two weeks since my last project update and I have quite a bit to talk about so buckle up.


Laying Out the Map

Since this project has so many moving pieces, I definitely began to loose track of what I had and what I needed. I couldn’t figure out what should be in the queue to print and produce, what was missing, and needed to visualize what our gameboard would look like. So like any person I decided to play with my toys and set it up as if I would play today.

Using some 12 inch x 12 inch colored construction paper I laid out my total desired board spacing to best visualize not only how much space a section of terrain will take but also if a region would “ooze” into other quadrants. Overall i’d call the experiment a success but my tiny assistant, did start tearing apart paper as you might be able to tell from the pictures.

Overall i think i’m beginning to have enough large terrain to be satisfied but still want one or two more feature pieces that really stand out along with significantly more verticality in movement such as bridges, planks and more. I’m also going to incorporate scatter terrain such as crates and barrels to provide more cityscape clutter for line of sight breakers and cover.


Printing Status Update

Since this project began I do not think my 3D printer has truly stopped producing more models and figures. I tend to have a few mass production cycles for the year and this for sure is one of them. So lets list the highlights of pieces made (definitely not all).

Infinite Dimensions Modular Rivers

While I only have a few pieces printed of the entire set of available pieces I do have enough printed to cross a section of our board. I am calling these pieces “good enough” to play with without producing more and are currently in progress on the painting bench.

I definitely have high goals and ambitions for river tiles and currently consider these more experimental pieces. I want to use some water effects, maybe stone pebble the river a bit, along with perhaps some grass? I know its the game of Frostgrave but by having some greenery on these would give me the best versatility for my tabletop as a whole. Maybe the Frozen City is showing signs of thaw?

Printable Scenery Graveyard Walls

These walls come from the Shadowfey Kickstarter of printable scenery. I decided upon using these over the options presented in Frostgrave part 2: Map Design. I am so glad that we choose this one as the walls themselves are taller than I anticipated and will be great for unique sections and break a decent portion of line of sight.

My wonderful husband has decided to help me and worked on these. The really wanted to try unique choices with orange stones and the white pillars and tombstones match the aesthetic of the original mausoleum.

Hagglethorn Hollow

I am currently in the process of printing the Hagglethorn Hollow ruins and some of the ruined buildings. Although difficult to see these ruins scream character and are perfect for play with a variation of verticality, windows, places to take cover, and places to add crosswalks and bridges.

The biggest thing i’m going to have to decide is if I should paint them a classic gray color or stay more true to the Hagglethorn Hollow color scheme (shown below). What do you think?

Hagglethorn Hollow Ruins Product Image

Printable Scenery Rope Bridge, Ladder, Stairs, and Gangways

Since laying out the models I had on my tabletop I’ve started to begin printing more pieces that would connect buildings and terrain in multiple story play.

While this is only a small portion of what I want to print I plan on making more and painting up these pieces.

I’m sure I’ve printed other things in the last two weeks on this project but it has honestly been hard to keep up with all the moving pieces. Also since so much of my hobby is printing in general I doubt I’d ever be truly done with printing stuff for my tabletop.


Graveyard Almost Complete

With the completion of painting the graveyard walls the graveyard feature piece for our Mausoleum scenario is almost complete. While some pieces like tombstones only are primed the whole area is just screaming for a game day. I’m so thrilled with how much fun it all looks and I even finished painting the Zombie set from Lost Adventures Volume 1. I was testing different skintones for what I wanted to use for the Zombie thugs for the Necromancer Warband.


It takes a Village

Last week I definitely suffered from the beginnings of feeling overwhelmed and hobby fatigue with how much i’ve produced and needed to paint. However at that time my wonderful husband offered to have a painting date night when all the kids went to bed (with a cat supervisor). What an incredible blast it was to share my hobby joy with him again. He had so much fun he even painted all days that weekend even on nights where I was too tired to paint. He is not someone who paints often but finds joy and pride in anything he gets done and ends up on the table. This is one of the most perfect of examples of sharing games and crafting with others and the joy it brings. I’ve greatly missed crafting with others and sharing the joy of experimentation and color choice. Also I really love seeing the color choices and techniques others use as they are different from my own.

In the last few days as well I had the incredible opportunity to teach a lifelong friend how to paint miniatures. I had no idea that he has always dreamt of trying to paint minis so I handed him some of my sigilist warband to try. We only got to spend a little bit of time together but he helped me start to basecoat my thugs and crossbowmen. I hope that I have corrupted him into joining the ranks to miniature painting so we can meet up and play games together. I still haven’t decided if i’m going to send him a care package in the mail of 3D printed models to kickstart his collection.

This Frostgrave project has become something truly special this year. My friends and family have been cheering me on and following along on my instagram as well as everyone reading here, so thank you. I have appreciated all the support and when I started to feel a lull in motivation i’ve been so surprised who offers to help or mention how motivating it has been for them.


Can I Make My Deadline?

For the goal of building my gameboard for Frostgrave I am well on my way to have all the terrain pieces I want to really make it a fantastic and fun experience . This will also work on improving some of my previous frustrations from past games.

My secondary goal of having everything painted for gameday will be cutting it really close. I would say that this goal of having all the terrain and miniatures painted will hinge on this upcoming week. You see i’m traveling back home to see my family to get some much needed vacation time in as well as celebrate the life of my grandfather who has been my inspiration in gaming. He will always have the title as one of my largest influences in my life to make me a gamer at heart. That along with my love with fantasy books.

In order to make this deadline I have packed some hobby stuff, perhaps too much paint and am working on using some of my time to paint on the road. I also bringing the warbands as well as scatter terrain and various pieces. Handsome hubs has still really enjoyed helping me so am bringing plenty to give him options and give him inspiration while trying to knock out my most time consuming pieces the miniatures. Stay tuned next week and find out how much I’ve accomplished. My goal would be to have at least my warband miniatures painted but time will tell.


Whats Next?

We are coming down to the wire and although I almost completely lost all momentum my friends and family have really come through in supporting my hobby which has felt incredible. Even a few have shown interest in playing. Maybe i’ll work towards expansion to a 4×4 board and more warbands for Christmas with a complete bestiary for a mega game with 4 to 5 players.

So far setting this deadline and chronicling the process has been an incredible motivator as well. The blog has been such a fun addition to my tabletop crafting hobby this year and so glad I finally started it. I still really want to add up all the data on materials, product sourcing, time printing etc to give people perspective as to how long or how much certain things take before the big game day. Maybe i’ll get some writing in as well this week.

What do you guys think? Think I can make my goals? Have you set a goal for yourself? Post, comment down below.

As always Happy Crafting,

Carrie aka Crazmadsci the Crazy Mad Scientist.


Frostgrave Series


Past Hobby Blog Posts