I do not think in the years of playing tabletop games i’ve had to encounter or made my players encounter a giant slug…. This may have to change. This model is gorgeous in its simplicity. I love the texture on the back of the slug and really look forward to painting. Straight forward print, nice and clean.
Giant Slug Miniature Print Data
Layer Height: 0.08 Bed Adhesion: Skirt Filament: Hatchbox Silver Printed On Prusa i3 MK3s Print Profile: Modified version of Cura 4.6 “Offical_FDG_Cura_ender3_and5miniatures_4mm” from The FatDragonGames website
File Name
Print Time
Estimated Material Used
Misc Notes
Giant Slug
6 hr 58 min
24g
Model came out fantastically. There is some retraction issues at the top but not difficult to file down.The texture on the back came out incredibly.
Where to Find STLs
Dragonlock Miniature store via DrivethroughRPG. Check out the entire collection at fatdragongames.com
Yet another one of the Fat Dragon Games miniature collections! I’m slowly making my way through this kickstarter and getting posts done. This collection is spiders. Having already had a previous spider version in their miniature collection the rearing option for the spider is new. Overall the model is decent but I am not the happiest with how the legs go into the sockets for the large rearing spider. It took some shaving with my exacto knife to make it fit more cleanly. Also the second spider swarm (more spiders on the base). Felt sloppy to me. Almost all of my prints have come up cleanly but this almost looks like a failed print to me. I am interested to see how these guys will turn out when I paint them.
Spider Miniature Print Data
Layer Height: 0.08 Bed Adhesion: Skirt Filament: Hatchbox Silver Printed On Prusa i3 MK3s Print Profile: Modified version of Cura 4.6 “Offical_FDG_Cura_ender3_and5miniatures_4mm” from The FatDragonGames website
File Name
Print Time
Estimated Material Used
Misc Notes
Giant_Spider Rearing A
3 hr 9 min
8g
Print came out well. Underside of legs were great. Nice detail on legs. There is also a thickened leg version but I did not print that and went with the skinny one.
Giant Spider Rearing B
22min
1g
decent detail but did not get the same level of detail as the main model. Also are the legs for the thickened version? Did not go into A very well.
Giant Spider Rearing C
22 min
1g
Pretty much same statement as above. Could not tell the difference in the legs when I assembled them. Wish there was some call out.
Swarm 1
37 min
1g
My favorite of the two swarms. It came out nicely and looks great.
Swarm 2
36 min
1g
Like mentioned above. This is probably my least favorite print in the entire Fat Dragon Games collection. It looks like a messed up print. I think too many things are trying to happen in a very very little layer height. I’d definitely print more swarm 1 over swarm 2
Where to Find STLs
Dragonlock Miniature store via DrivethroughRPG. You can also find the miniatures in their collection at the Fat Dragon Game Website (fatdragongames.com).
I do not know what it is about turtle miniatures but I absolutely love them. These are some of my absolute favorite from the Fat Dragon Game collection and I love the feel of them. I’ve previously printed the Fat Dragon Game Turdle Fighter collection and love them. I can’t wait paint these guys and find an excuse to have them on my tabletop to play.
Turdle Miniature Print Data
Layer Height: 0.08 Plate Adhesion: Majority of time used 6mm brim with no supports Orientation: Vertical with base flat on bed Filament: Hatchbox Silver Printed On Prusa i3 MK3s Print Profile: Very Modified Version of Cura 4.6 “Offical_FDG_Cura_ender3_and5miniatures_4mm” from The FatDragonGames website
File Name
Print Time
Estimated Material Used
Misc Notes
Turdle_04 (Bow)
1 hr 53 min
5g
Great looking Mini! Very proud of it
Turdle_05 (Staff)
1 hr 51 min
5g
Also a great looking mini, oops staff broke. (Repairs quickly). Could potentially work on bridging of under shell and very slight retraction from staff to body
Turdle_06 A (Axe) Turdle_6 B (Sheild)
1 hr 42 min
5g
I think i’m going to paint the mini before I attach the shield. I absolutely love the bedroll on top of this mini
Where to Find STLs
Dragonlock Miniature store via DrivethroughRPG. Vendor images are from Fat Dragon Game Website.
Special Note: The Oxidation Beast also known as a Rust Monster in Dungeons and Dragons is considered a medium sized monstrosity. If you wish to keep the miniature in a 1″ scale for tabletop gameplay you will have to resize the creature. This model originally has a size of 26.9566 mm x 35.1585 mm x 16.3927 mm. Since the X-axis and Y-axis is greater than 25.4 mm scaling the monster down is more accurate. Reducing to a 71.11% size of its original provides dimensions of 19.1679 mm x 25 mm x 11.6563 mm.
This is on the agenda to do but currently the print data below is for a full sized Oxidation Beast as I forgot to scale it down…. twice.
Oxidation Beast Miniature Print Data
Layer Height: 0.08 Filament: Hatchbox Silver Orientation: Flat with base on bed Printed On Prusa i3 MK3s Print Profile: Cura 4.6 “Offical_FDG_Cura_ender3_and5miniatures_4mm” from The FatDragonGames website
File Name
Print Time
Estimated Material Used
Misc Notes
Oxidation_Beast
1 hr 23 min
3g
Printed twice, accidently forgot to scale down for accurate sizing regarding Dungeons and Dragons stat blocks. I do like the model not having a gab at the base for easier painting.
Where to Find STLs
Dragonlock Miniature store via DrivethroughRPG. Vendor images are from Fat Dragon Game Website.
This miniature was super easy to print and comes in several pieces for easy assembly. My favorite aspects are the paint stand which will be incredibly useful when painting and how the base will be easy to reach to paint. The mouth is open in the back of the front piece to more easily paint the inside of the gaping mouth and tongue (WIN!). I only used the Large Peg in this STL folder as it fit perfect in the model. There is also a small peg file which i did not use. I can’t wait to paint this guy!
Angry Ball of Eyes Miniature Print Data
Layer Height: 0.08 Printed On Prusa i3 MK3s Filament: Hatchbox PLA Silver Print Profile: Cura 4.6 “Offical_FDG_Cura_ender3_and5miniatures_4mm” from The FatDragonGames website
Abbreviations: Angry Ball of Eyes (ABE)
File Name
Print Time
Estimated Material Used
Misc Notes
ABE_Base
3hr 3 min
10g
Print was very nice. Some small nit picky 1st layers issues on bottom but unnoticeable
ABE_PaintStand
2 hr 2 min
5g
Did not need to print at a fine layer height but I wasn’t paying attention
ABE_LargePeg
13 min
1g
Fit model perfectly. Did without a brim for a nice fit
ABE_Front and Back
5 hr 36 min
22g
Also printed without a brim since there was enough surface area on the model for a great adhesion and would keep the model cleaner. Teeth on front game out great.
Where to Find STLs
Dragonlock Miniature store via DrivethroughRPG. Vendor images are frome Fat Dragon Game Website.
