Overview ~ Printed Images ~ Print Data Resin / Filament ~ Where to find Files

Project Main: Lost Adventures Vol 3

Overview

The Kobold Coalition is split up into three primary groups the NPCs, Scavengers, and Trash Guard. Here I will list my observations, print images and data associated with printing the Kobold Coalition NPCs. Models are from the Uncharted Lands: Lost Adventures Volume 3 Kickstarter i’ve been test printing for.

What is truly special about this collection is that I have test printed this in both Filament and Resin prints. This really has inspired me to write a discussion about FDM vs Resin in miniature printing for a future writeup. Data for both types of printing are listed below. For side by side comparison Filament prints shown on left (light grey) and resin prints shown on right (dark grey).

I cannot articulate how much I truly love these little guys.


Printed Images


Print Data Resin

Printer: Phrozen Sonic Mini 4K
Resin: Epax Hard Grey
Layer Height: 0.05 mm

Time to Print all components: 6 hr 43 min
Resin to Print: 34.17 g
Estimated Cost to Print: $1.40 or $0.23 per miniature


Print Data Filament

Printer: Prusa MK3s
Filament: ESun Pla+ Grey
Layer Height: 0.08 mm

Time to Print all components: 11 hr 17 min
Filament to Print: 26.37 g
Estimated Cost to Print: $0.61 or $0.09 per miniature


Where to Find these Files

These files can be currently found as apart of the currently running Lost Adventures Volume 3 Kickstarter, which is running until August 31, 2021.

Lost Adventures Co: Website


See Previous Lost Adventure Kickstarters on the site


More Kobold Coalition

Leave a Reply